Janome HD3000, Instruction Book

Page: 28 / 48

24
y
u
i
o
!0
!1
!2
!3
y
o
u i
!0
!2
!1
Insert the fabric under the foot.
Turn the handwheel one complete turn by your
hand.
Remove the fabric to the left to draw both threads
to the left.
Insert the garment under the foot, and lower the
needle at the starting point.
Then lower the automatic buttonhole foot.
Sew slowly and stop the machine at the starting
point when a buttonhole is completed.
*The machine sews front bartack and left row first,
then the back bartack and right row.
Cut the both needle and bobbin threads leaving
about 10 cm (4˝) thread ends.
Draw the needle thread to wrong side of fabric by
pulling the bobbin thread.
Then, knot the threads.
Cut the both needle and bobbin threads leaving
about 10 cm (4˝) thread ends.
Draw the needle thread to wrong side of fabric by
pulling the bobbin thread.
Then, knot the threads.
To repeat buttonhole sewing.
After a buttonhole is sewn, move the indicator to
pattern “1” [ ] by turning the pattern selector dial
in the direction of arrow 1, then return the indicator
back to “BH” by turning the dial in the direction of
arrow 2 to reset for sewing the next buttonhole.
When buttonhole sewing is finished, push the but -
tonhole lever upward as far as it will go.
!3