Janome HD3000, Instruction Book

Page: 14 / 48

10
Threading the Bobbin Winder
Draw the thread from the spool.
Guide the thread around the thread guide.
Guide the thread around the bobbin winder thread
guide.
Insert the thread through the hole the bobbin,
threading from the inside to the outside.
Put the bobbin on the bobbin winder spindle, and
push it to the right.
With the free end of the thread held in your hand,
depress the foot control.
Stop the machine when it has made a few turns,
and cut the thread close to the hole
in the bobbin. Depress the foot control again.
When the bobbin is fully wound, it will
stop automatically.
Return the bobbin winder to its original position by
moving the spindle to the left, and
cut the thread as shown.
* The machine will not sew untill the spindle has
been returned to the left.
q
w
e
r
t
y
u
q
w
e
w e
y
u
t
r