Janome G1206, Instruction Book

Page: 16 / 52

10
Thread and Needle Chart
Fabrics Thread
Needle Size
Crepe de Chine, Voile, Fine Silk 9
Lawn, Organdy, Fine Cotton or
Georgette, Fine Synthetic 11
Tricot Fine Cotton
Covered
Polyester
Linens, Cotton, Piqué, 50 silk 11
Serge, Double Knits, 50 to 80 Cotton or
Percale 50 to 60 14
Synthetic
Cotton Covered
Polyester
Denim, Tweed, 50 silk 14
Gabardine, or
Suiting, Drapery and 40 to 50 Cotton 16
Upholstery Fabric 40 to 50
Synthetic
Cotton Covered
Polyester
Light
weight
Medium
weight
Heavy
weight
* In general, fine threads and needles are used
for sewing thin fabrics, and thicker threads and
needles are used for sewing heavy fabrics.
* Always test thread and needle size on a small
piece of the fabric which will be used for actual
sewing.
* Use the same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and
synthetics,use a BLUE TIPPED needle.
The blue tipped needle effectively prevents
skipped stitches.
Changing Needles
Raise the needle by turning the handwheel
toward you and lower the presser foot.
z
Loosen the needle clamp screw by turning it
counterclockwise.
Remove the needle from the clamp.
x Insert the new needle into the clamp with the
flat side away from you.
When inserting the needle into the clamp,
push it up as far as it will go and tighten the
clamp screw firmly with the screwdriver.
To check the needle
Place the flat side of the needle on something flat
(needle plate, glass etc.). The clearance between
the needle and flat surface should be consistent.
Never use a bent or blunt needle.