AAASewing.com
26
0
1
3
2
4
5
6
1
2
3
4
0
3
2
4
Corded Buttonholes
Stitch selector:
BH
Stitch width:
4Ð6.5
Stitch length:
Top thread tension:
1Ð5
Presser foot:
R: Automatic buttonhole foot
Use the same procedure as automatic
buttonhole.
* Set the stitch width to match the thickness
of the cord used.
With the buttonhole foot raised, hook the filler
cord on the spur at the back of the buttonhole
foot.
Bring the ends toward you under the
buttonhole foot, clearing the front end.
Hook the filler cord into the forks on the front
of automatic buttonhole foot R to hold them
tight.
Lower the needle into the garment where the
buttonhole will start and lower the foot.
Depress the foot control gently and sew the
buttonhole. Each side of the buttonhole and
the bartacks will be sewn over the cord.
Remove the fabric from the machine and cut
the sewing threads only.
Spur
Needle thread
Bobbin thread
Pull the left end of the filler cord to tighten it.
Thread the end through a darning needle,
draw to the wrong side of the fabric and cut.
* To cut the buttonhole opening, refer to the
instructions on page 24.
R
Janome 5024 Instruction Manual
www.aaasewing.com
5024 Owners Manual/ User Guide
