AAASewing.com
11
¥ Inserting the Bobbin
Place the bobbin in the holder with the
thread running off counterclockwise.
End of thread
Guide the thread into the notch
on the
front side of the bobbin holder.
Draw the thread to the left, sliding it between
the tension spring blades.
Notch
Continue to draw the thread lightly until the
thread slips into notch
.
Pull out about 15 cm (6Ó) of thread.
Notch
Attach the hook cover plate.
Check the threading by referring to the chart
shown on the hook cover plate.
Threading chart
10
1/8 3/8 5/8
Janome 5024 Instruction Manual
www.aaasewing.com
5024 Owners Manual/ User Guide
