AAASewing.com
22
0
1
3
2
4
5
6
3
2
4
Sewing Buttons
Stitch selector:
3
Stitch width:
3Ð3.5
Top thread tension:
3Ð7
Drop feed dog
Presser foot:
F: Satin stitch foot
Tape the button over the placement mark. A pin can
be placed on top of the foot to form a shank. Before
lowering the foot, test the needle swing, making sure
the needle drops in each hole.
Adjust the stitch width if necessary and lower the
foot.
Align both holes of button with the needle swing,
lower the foot and depress the foot control.
Sew about 10 stitches, then pull out approximately 20
cm (8ý) of both the needle and
bobbin thread and cut.
Pull the needle thread down through the hole in the
button (so it is between the hole and fabric), Now,
pull the needle thread firmly to draw the bobbin
thread up through the fabric.
Wind one thread clockwise around the shank, the
other counterclockwise.
Finally, tie the 2 threads together.
Needle thread
Bobbin thread
Shank
Fabric
Janome 5024 Instruction Manual
www.aaasewing.com
5024 Owners Manual/ User Guide
