janitza UMG 604-PRO, User Manual And Technical Data

Page: 50 / 87

UMG 604-PRO
www.janitza.de
45
11. 9 Recording configuration
2 recordings are pre-configured in the
device’s factory default setting.
Recordings are adjusted and expanded using
the GridVis® software.
Recording 1
The following measured values are recorded
with the time base of 15 minutes:
• Voltage effective L1
• Voltage effective L2
• Voltage effective L3
• Voltage effective L4
• Voltage effective L1-L2
• Voltage effective L2-L3
• Voltage effective L3-L1
• Current effective L1
• Current effective L2
• Current effective L3
• Current effective L4
• Active power L1
• Active power L2
• Active power L3
• Active power L4
• Total active power L1-L3
• Total active power L1-L4
• Reactive power fundamental oscillation L1
• Reactive power fundamental oscillation L2
• Reactive power fundamental oscillation L3
• Reactive power fundamental oscillation L4
• Total reactive power fundamental
oscillation L1-L3
• Total reactive power fundamental
oscillation L1-L4
(The mean value, minimum value, and
maximum value are also recorded for each
measured value.)
Recording 2
The following measured values are recorded
with the time base of 1 hour:
• Active energy drawn L1
• Active energy drawn L2
• Active energy drawn L3
• Active energy drawn L4
• Total active energy drawn L1-L3
• Total active energy drawn L1-L4
• Inductive reactive energy L1
• Inductive reactive energy L2
• Inductive reactive energy L3
• Inductive reactive energy L4
• Total inductive reactive energy L1-L3
• Total inductive reactive energy L1-L4