JPC70
www.janitza.com
8
4.
Product description
The device is intended for:
• visualization of current and voltage
measuring devices in a bus system.
• monitoring of measured values and
settings of connected measurement
devices.
• configuration of the connected slave
devices.
• installation in permanently installed switch
cabinets or small installation distributors.
4. 1
Operating concept
You can program the device in several
different ways and/or display
measured values:
•
Directly on the device
via the display
with touch screen.
• Via the Ethernet interface with
a connected PC
.
Only the operation of the device via touch
screen is described in this operating manual.
NOTE
An input aid is recommended for operation
on the touch screen.