JPC70
www.janitza.com
20
Actions for this UMG
Additional configuration options to facilitate
the handling of multiple slave devices are
available with the
Actions for this UMG
button (see Fig. 17).
Here, you can:
• Reset energy meters and minimum/
accident current values of individual
channels.
• Reset energy meters and minimum/
accident current values of all channels
of the selected device.
• Carry out configuration of a channel for all
channels of the device.
Fig. 16: Actions for this UMG in the JPC70
Overcurrent warning level and alarm level
The warning level and alarm level for
overcurrent can be configured with the
JPC70.
With the
Set IO
selection box, you can define
whether outputs should be activated when
the warning level or alarm level is exceeded.
Low-pass filter
You can activate the low-pass filter as
necessary by activating the
Low-pass filter
selection box. For more information about the
low-pass filter function, refer to the device
documentation for the respective device.
Delay time
Messages of temporary threshold violations
are hidden with parameterization of delay
times for warning and alarm messages.
They are displayed when the delay time
has elapsed and the current path increases
further above the upper threshold. The delay
times can be adjusted separately for each
measuring channel.
Fig. 17: Configuration interface of the slave devices in the JPC70
Button
Actions for this
UMG