www.janitza.de
17
Modules 800-CT8-A | 800-CON
3.10 Operating concept
Options to configure the basic device with current
measuring module or to read measured values:
·Display and buttons on the basic device (user
interface).
·GridVis
®
network analysis software.
·RS-485 interface or Ethernet interface.
3.11 GridVis
®
network analysis software
With the GridVis
®
software, you have the perfect
tool for programming, reading out and visualizing
measurement data (download at www.janitza.de).
Performance characteristics of the GridVis
®
software
·Configuration of the device
·Graphic display of measured values
·Online help and tutorials
Connections to the PC (GridVis
®
software)
Connections for communication between the PC
and the basic device with modules can be found in
chapter 6 on page 32.
INFORMATION
Please take note of the documentation of your
basic device (without the module)! Basic or
identical information and chapters, such as
·
Commissioning
·
Configuration
·
Technical data
·
Error messages
·
Procedure in the event of a malfunction, etc.
can be found in the usage information of your
basic device.
A list of parameters and Modbus addresses with
data on your basic device with module is available
for you as a download at www.janitza.de.
INFORMATION
This user manual describes the modules and
provides information on the operation of the
modules via the basic device (UMG 801).
The GridVis
®
software has an online help with
tutorials.
