Modules 800-CT8-A | 800-CON
www.janitza.de
16
3.7 Scope of delivery, 800-CT8-A current
measuring module.
Quan-
tity
Part. no.
Designation
1
52.31.201
Module 800-CT8-A
(current measuring module)
1
52.31.207
Bus connector - Current measuring
module
1
10.01.953 End bracket
1
33.03.378
Installation instructions (DE/EN)
"Current measuring module for the
UMG 801"
1
33.03.342
"Safety information” supplement
(12 languages)
1
33.03.059 “Mounting” supplement
1
10.01.853
Screw terminal, plug-in, 8-pole
(current measurement I1..I4 and
I5..I8)
Tab. Scope of delivery, 800-CT8-A current measuring module
INFORMATION
·The modules are delivered with the necessary
screw terminals and bus connectors (JanBus
interface) for connection to the basic device or
other modules.
·All supplied options and design variants are
described on the delivery note.
·With the GridVis
®
network analysis software
available at www.janitza.de, you can configure
your basic device with modules and read out data
for analysis (prerequisite: PC connection with your
basic device).
3.8 Scope of delivery, 800-CON transfer
module (set of 2).
Quan-
tity
Part. no.
Designation
1
52.31.210
800-CON module - Transfer module
(set of 2)
1
52.31.208 Bus connector - Transfer on right
1
52.31.209 Bus connector - Transfer on left
2
10.02.188 Shield clamps
2
10.01.953 End bracket (Weidmüller)
1
33.03.379
Installation instructions (DE/EN)
"Transfer modules for the UMG 801"
1
33.03.342
"Safety information” supplement
(12 languages)
1
33.03.059 “Mounting” supplement
2
10.01.938 Screw terminal, plug-in, 8-pole
Tab. Scope of delivery, 800-CON transfer module
Quan-
tity
Part. no.
Designation
1
08.02.451
Data cable for connecting the
"transfer modules" (1000 mm -
pre-assembled, twisted pair data
cable)
1
08.02.452
Data cable for connecting the
"transfer modules" (225 mm -
pre-assembled, twisted pair strand-
ed hook-up wires)
Tab. Accessories
3.9 Accessories “800-CON transfer module”