janitza 800-CT8-A, User Manual And Technical Data, Page: 26 / 58

Modules 800-CT8-A | 800-CON www.janitza.de
26
4.6 Connections/controls on 800-CON module
1 2
1 2
3 3
Item Designation Description
1 Screw terminals, 8-pole Output or input module
2 Screw terminals, 8-pole Output or input module
3
JanBus interface -
rear of module
Connection sockets for the bus connector (note output/input!)
4
Transfer module
output bus connector
Plug for insertion into the basic device or an attached module
5
Transfer module
output bus connector
Connector for insertion into the rear of the module
6
Transfer module
input bus connector
Connector for insertion into the rear of the module
7
Transfer module
input bus connector
Sockets for module insertion
4
INFORMATION
The transfer modules (800-CON) of the set of 2 are
suitable as output or input modules!
However, make sure to mount the correct bus
connectors (output and input)!
Always mount components of your JanBus system
from the output bus connector to the input bus
connector. This will avoid an incorrect connection
of remote JanBus systems! Cf. chapter „5.3 Data
transfer with 800-CON module“ on page 30.
INFORMATION
The transfer modules are supplied with the necessary
screw terminals and bus connectors (JanBus
interface) for connection to the basic device or other
modules.
6
5
7