JANE Trider, Instruction Manual

Page: 24 / 112

24
TRIDER
The handlebar can be set to 7 different positions. Simulta-
neously press the buttons on both sides of the handlebar.
14
If required it is possible to release one side of the armrest and it
will still be completely articulated by the other side. There are
buttons on the lower part to do this.
12 -12a
The safety armrest is designed to fit into the slots on the
hammock.
6.- USING THE SAFETY ARMREST
Your TRIDER is fitted with the pro-fix system. With this sys-
tem, the TRIDER hammock can be attached perfectly to the
chassis. What’s more, the hammock is reversible so it can be
positioned facing you or facing forwards.
8 - 9
To take the hammock off, simultaneously pull the unlocking
levers situated on both sides of the hammock.
4.- FITTING AND REMOVING THE HAMMOCK
To fasten the hood onto the frame of the hammock, slide it
from the top down to the corresponding slots on the central
part. Use the zip on the hood to attach it to the frame.
13 -13a
Follow the same steps in reverse order to take the hood off.
7.- USING THE HOOD
The hammock can be reclined so your baby can travel in the
most comfortable position possible at all times. Pull the lever
on the upper part of the hammock and tilt it to one of the 3
possible positions.
10
5.- ADJUSTING THE ANGLE OF THE HAMMOCK
8.- ADJUSTING THE HANDLEBAR
WARNING: Position P is only to be used when folding the
pushchair, you must not use this position when your baby
is in the hammock.
11
WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.