JANE Strata, Instructions Manual

Page: 22 / 87

STRA
TA
22
2 Adjustments before use
Adjusting the height of the shoulder straps
To ensure that they offer maximum protection, the shoulder straps on the
STRATA safety seat must be set just above the baby's shoulders. Check this
height with the baby seated correctly in the safety seat. The lowest positions
of the headrest, which are for the first few months of use, are connected to
an automatic system that raises the base of the seat.
The STRATA safety seat has a quick system for controlling the height of the
shoulder straps. Simply press a button and slide the headrest.
2a STRATA has 6 heights for the shoulder straps. To change position, press the
switch on the backrest and slide it into the desired position.
2b Release the switch and move the headrest until it reaches the nearest
locking position, when you should hear a click. Check that it is locked by
pulling the headrest.
WARNING Check and adjust the height of the shoulder straps
as the baby grows.
Changing the position of the handle
The handle has 4 positions ( 2c ), each of which has a specific function:
Position 1: Stability, the handle stops it from tipping over when on a flat
surface.
Position 2: Intermediate position. In this position, the handle is integrated
into the casing.
Position 3: Carrying. Position for installing and removing the seat in a
JANÉ chassis and for carrying.
Position 4: AUTO. For car journeys.
To change position, press the lever on the handle ( 2d ) and turn the handle
until you reach the desired position.