JANE IKONIC, Manual, Page: 26 / 98

EN
Your new IKONIC from JANÉ-CONCORD is a safety seat
designed to protect the baby in the car. This product is suitable
for children of up to 18 kg, with a height of between 40 and 105
cm.
This is an “i-Size” child restraint system. It has been approved
under Regulation 129/03, for general use in vehicles fitted with
the “i-Size” system.
It can be used in vehicles with “i-Size” authorised seats (check
the details in the vehicle instruction manual) and vehicles
compatible with the class B1 or D ISOfix category (see the
compatibility list on the website: www.janeworld.com ).
If in doubt, consult your distributor, or check the website:
www.janewor ld.com
It is very important that you read these instructions carefully
before using the IKONIC safety seat for the first time. Make sure
that everyone who is going to use it at any time is also familiar
with the instructions for correct installation and use. It has been
shown that a significant percentage of safety seat users do not
install their seats correctly; understanding and following the
instruction manuals correctly is as important for safety as the
actual seat itself.
Keep the instructions in the compartment underneath the seat,
and consult them if you have any doubts. You can also find the
instructions on our web page: www.janewor ld.com You will also
find a QR code, on a label on the side of the upholstery, with a
demonstration video.
26
IM 2046.04_IKONIC2 CONCORD alta1.indd 26 11/6/21 11:56