JANE CONCORD iTOURER, Instructions Manual

Page: 42 / 102

40
EN
_ Changing the direction of the safety seat
The iTOURER safety seat can be used in the rear facing position from birth to 105 cm in
height, or in the forward facing position from 15 months up to 125 cm. In the 40 to 105 cm
set-up, the safety seat can rotate 360° degrees.
It can be locked into 4 different positions:
Forward facing and rearward facing (the only positions suitable for travelling in) and 2
loading positions
(WARNING: THE LOADING POSITIONS ARE NOT SUITABLE FOR TRAVELLING IN) .
To release the swivel feature, pull the lever on the base (17) and turn the seat to the required
locking position. ( 2a )
NOTE: In vehicle without rear seat doors, the swivel is limited for reasons of space between
the seat and the sides.
Using the cushion insert.
The iTOURER safety seat comes with some cushion inserts to reduce the inner size of the
seat when the baby is small.
These cushion inserts are adjustable depending on the height of the baby:
Up to 75 cm
From 75 cm to 87 cm
From 87 cm upwards
8a +8b +8c
8b
-
wedge headrest c side cushions
side cushions only
without cushion inserts