Jandy
®
Infinite WaterColors
™
Nicheless LED Light | Owner’s Manual
Jandy
®
Infinite WaterColors
™
Nicheless LED Light | Owner’s Manual
ENGLISH
Page 15
4. From the IWC Lights Zone
Setup screen, choose Zone
Name.
5. From the IWC Lights Rename
screen, choose the zone you
want to name and enter the
name.
6.2 Select Color
1. Choose equipment on the
OneTouch display screen and
press select.
Section 7. Amazon Alexa Light Control
Go to iaqualink.com for more information on controlling your Infinite
WaterColors lights through Amazon Alexa.
Section 8. Winterizing
Do not keep the winter water level at the level of the light. Make certain that
the water level is left at least 4” or more above or below the light depending
on the pool’s other winterization needs. Consult a Local Swimming Pool
Professional for proper winterization. At NO TIME should there be water
removed from the pool without checking ground water tables.
Section 9. Troubleshooting
Use the troubleshooting information in the following table for suggestions.
Problem
Possible Cause
Corrective Action
Lights are out of sync
Zones are set
differently
Check that lights are in the
same zone or the same light
show is applied to all zones.
2. Scroll through the menu and
select the desired light zone.
3. From the list of preset colors
and light shows, select the
desired color.
NOTE
To turn off lights, re-select
the light zone and wait 5
seconds.
NOTE
Custom color can only be
adjusted using the iAquaLink
app.
