- -
nVIDIA N68PV/N68S/N68PVNT User Manual
4.5.10 Frequency/Voltage Control
・
Clear CMOS by Hotkey
At Power Up, Press Hotkey To Clear CMOS.
Available options: [Disabled] [Ctrl] [F1] [F2] [F3] [F4] [ESC] [Space] [Enter].
・
DRAM Configuration
Click <Enter> key to enter its submenu.
You may manually set the DRAM timing parameters through its sub-items, or leave them
at their default settings according to the SPD (Serial Presence Detect) data stored in the
DRAM.
・
BIOS Write Protect
Enable: BIOS ROM Write Protect. Disable: BIOS ROM Not Write Protect.
・
Lan BootROM Control
Available options: [Disabled] [Enabled]
・
CPU Frequency
: This item allows you to adjust the CPU Frequency.
・
VGA Frequency
: This item allows you to adjust the VGA Frequency.
・
PCIE Clock
: This item allows you to select the PCIE clock.
・
DRAM Voltage Control
: This item allows you to adjust the DRAM Voltage.
・
DRAM Volt
: This field displays the current voltage of DRAM.
・
CPU Voltage Control
: This item allows you to adjust the CPU Voltage.
・
CPU Volt
: This field displays the current voltage of CPU.
・
Chipset Voltage Control
: This item allows you to adjust the Chipset Voltage.
・
Chipset Voltage
: This field displays the current voltage of Chipset.
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may
result in damages or shortened life expectancy to these components.
Please be aware that the menu items are for power users only.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Frequency/Voltage Control
►
Clear CMOS by Hotkey
►
DRAM Configuration
BIOS Write Protect
Lan BootROM Control
*** Over Clock ***
CPU Frequency
VGA Frequency
PCIE Clock
*** Voltage Control ***
DRAM Voltage Control
DRAM Volt
CPU Voltage Control
CPU Volt
Chipset Voltage Control
Chipset Voltage
[
Disabled
]
[Press Enter]
[Disabled]
[Disabled]
[200]
[525]
[100MHz]
[Default]
1.88 V
[Default]
1.26 V
[Default]
1.20 V
Item Help
Menu Level
►
↑
↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Disabled
