- 2 -
nVIDIA N68PV/N68S/N68PVNT User Manual
・
Init Display First
This feature allows you to select the first initiation of the monitor display from which card
when you install a PCI card and a PCI Express VGA card on the mainboard.
・
Onboard Lan Chip
This option enables or disables the LAN controller.
・
OnChip USB
This option allows you to disabled the USB function or select the mode of USB.
・
USB Memory Type
Available options: [Base Memory (640K)] [Shadow].
・
USB Keyboard Support
This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS]
in OS environment.
・
Onboard Audio
This item allows you to enable or disable the onboard audio.
・
POWER ON Function
This item selects the way you want your system to power on.
[Password]:
Use a password to power on the system, select this option then press
<Enter>. Enter your password. You can enter up to 5 characters. Type in
exactly the same password to confirm, and then press <Enter>.
[Hot KEY]:
Use any of the function keys between <Ctrl+F1> to <Ctrl+F12> to power
on the system.
・
KB Power ON Password
If you select [Password],this function will be activation.
Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.
・
Hot Key Power ON
If you select [Hot Key], this function will be activation.
Available options: Ctr-F1~F12
・
Onboard FDC Controller
This option enables or disables the onboard FDC controller.
・
Onboard Serial Port 1
This item determines which I/O addresses the onboard Serial Port controller will access.
[Auto]:
The system automatically select an I/O address for the onboard Serial Port.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an
I/O
address for the onboard Serial Port.
[Disabled]:
Disables the onboard Serial Port.
・
UART Mode Select
This item allows you to choose the routine IrDA protocol or ASKIR protocol. The IrDA
maximum speed is 115.2K bps; ASKIR maximum speed is 57.6K bps. Default setting is
Normal.
・
RxD , TxD Active
Active This item allows you set the transport speed of the IR devices.
・
IR Transmission Delay
Available options: [Disabled] [Enabled]
・
UR2 Duplex Mode
This item allows user choose IR mode.
Available options: [Full], [Half]
・
Use IR Pins
Available options: [IR-Rx2Tx2] [RxD2,TxD2]
・
PWRON after PWR-Fail
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
