- 1 -
nVIDIA N68PV/N68S/N68PVNT User Manual
4.5.8 PnP PCI Configuration
・
Reset configuration data
Usually you'd better keep this setting [Disabled].
・
Resource controlled by
The plug and play bios from Award can configure all the booting devices and plug and
play devices automatically.
・
IRQ Resources
Press <Enter> to enter the sub-menu and the following screen appears. When "Resources
Controlled By" sets to [Manual], this field is adjustable.
IRQ-5 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-14 assigned to PCI Device
・
PCI/VGA Palette Snoop
If this option sets to [Enabled], different VGA devices which work in different bus will
manage the data from CPU with different palettes.
NOTE: This option can fix some issue that the VGA card is not standard .We suggest you
to keep the default setting.
・
Maximum Payload Size
This setting specifies the maximum TLP payload size for the PCI Express devices. The unit
is byte.
・
Power-On by Alarm
The field is used to enable or disable the feature of booting up the system on a scheduled
time/date.
・
Date (of Month) Alarm
[0]:
This option power-on the system everyday according to the time set in the “Time
(hh:mm:ss) Alarm” item.
[1-31]:
This option selects a date you would like the system to power-on. The system
will power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.
・
Time (hh:mm:ss) Alarm
This item sets the time you would like the system to power-on.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
Item Help
Menu Level
►
** PCI Express relative items **
Maximum Payload Size
[4096]
↑
↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Disabled
