J&M SpeedTender Hydraulic Jack, Service And Installation Manual

Page: 10 / 11

10
6
7
8
10
11
12
13
9
15
16
14
1 2 3 4
5
Set Up Instructions
Install Hoses
• Install the hoses as shown below.
• Hose “16” is an “Existing Hose” connected to the “Bottom Port”
• Unhook “16” from the bottom port of the valve bank, and connect directly to hose “15” shown below.
• Hose 14 will then get connected to the “Bottom Port” on the valve bank.
• Tighten fittings.
Description Part No.
1 3/8” Male NPT x 3/8” Male JIC; 90 Degree Elbow JM0026121
2 Serviceable Pilot Check Valve JM0061684
3 Check Valve Cartridge JM0074412
4 3/8” Male NPT x 3/8” Male ORB; Straight JM0061726
5 3/8” x 25” Hydraulic Hose 25inch6M3K-6G-6FJX-6G-6FJX JM0049162
6 3/8” Male JIC x 3/8” Male ORB; Straight JM0043614
7 3/8” x 68” Hydraulic Hose 68inch6M3K-6G-6FJX-6G-6FJX JM0073253
8 3” x 24” x 1-1/2” Welded Cylinder (JD324) JM0019644
9 3/8” Male NPT x 3/8” Male JIC; 90 Degree Elbow JM0061728
10 3/8” Male JIC x 3/8” Female JIC with .047 Orifice JM0054918
11 3/8” Male JIC x 1/2” Male ORB; 90 Degree Elbow JM0037159
12 Hydraulic Jack Hand Valve with Pressure Relief JM0031858
13 1/2” Male JIC x 1/2” Male ORB; 90 Degree Elbow JM0010297
14 1/2” x 68” Hydraulic Hose 68inch8M3K-8G-8FJX-8G-8FJX JM0073262
15 1/2” x 34” Hydraulic Hose 68inch8M3K-8G-8FJX-8G-8FJX JM0073263
16 1/2” x 34” Hydraulic Hose 34inch8M3k-8G-8FJX-8G-8FJX JM0010287
Bottom Port
Existing Hose