background image

5

 ATTENTION!  BECOME ALERT!  YOUR SAFETY IS INVOLVED! 

Safety is a primary concern in the design and manufacture of our products.  Unfortunately, our efforts to provide safe equipment can 

be erased by an operator’s single careless act.  In addition, hazard control and accident prevention are dependent upon the awareness, 

concern, judgment, and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.  

Make certain that the operator(s), prior to operating is instructed in safe and proper use and reviews and understands the manual(s) 

pertaining to this machine.  Read this manual before you operate this machine.  If you do not understand any part of this manual, or need 

more information, contact the manufacturer or your authorized dealer.

 SAFETY 

Understand that your safety and the safety of other persons is measured by how you service, and operate this machine.  Know the positions 

and functions of all controls before you try to operate them.  Make sure to check all controls in a safe area before starting your work.

The safety information given in this manual does not replace safety codes, federal, state or local laws.  Make certain your machine has the 

proper equipment as designated by local laws and regulations.

Keep all safety shields in place.

Keep hands, feet, hair and clothing away from moving parts while unit is in operation.

Ensure that everyone is clear of equipment before operating the jack.

Avoid high pressure fluids.  Escaping fluid under pressure can penetrate the skin causing serious injury.  Always relieve pressure before 

disconnecting hydraulic lines.  Wear proper hand and eye protection when searching for leaks.  Use wood or cardboard instead of hands.  

Keep all components in good repair.  

Safety Rules

Repair Parts List and Diagrams

When performing maintenance work, wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing and 

head.  Follow the Operator’s Manual instructions to ensure safe and proper maintenance and repair.
Your local, authorized dealer can supply genuine replacement parts.  Substitute parts may not meet original equipment specifications 

and may be dangerous.

 

WARNING

MAKE SURE ALL POWER IS SHUT OFF BEFORE PERFORMING ANY MAINTENANCE OR REPAIR WORK.

Summary of Contents for SpeedTender Hydraulic Jack












Reviews: