J&J Sanitary Ware SPA J-838, Operating Instruction

Page: 11 / 15

e. Details concerning cleaning and other maintenance
f. Maintenance of water purity, especially PH values and chlorine concentrations.
g. Cleaning and disinfection
h. Use and installation of a cover.
i. Disposal of water
j. Precautions to avoid damage due to water freezing
k. Precautions to avoid damage when the appliance is left empty for extended period.
2.2 Sub-clause 7
The installation instruction shall state the substance of the following:
- Earthed appliances must be permanently connected to fixed wiring;
- The appliance should be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
- The floor has to be capable of supporting the expected load.
- An adequate drainage system has to be provided to deal with overflow water.
- Details of how to follow the wiring rules, for example, specifying that parts are installed in the correct zone
and that equipotential bonding is carried out.
WAR
NING
1
、
DANGER
：
RISK OF ELECTRIC SHOCK
，
Connect only to a circuit protected by a
Ground Fault Circuit lnterrupter.
2
、
Grounding is required. The unit should be installed by a qualified service representative and
ground.
3
、
FOR YOUR SAFETY-This product should be installed by a professional service
technician,qualified in hydrotherapy bath installation.
4
、
lt’s prohibited to cover the instrument with something while opeating.
5
、
when using at the first time ,Be sure there is water in heater pipe before staring.
6
、
parts containing live parts, except parts upplied with safety extra-low voltage not Exceeding
12V,must be inaccessible to person in the bath
；
8
、
earthed appliances must be permanently connected to fixed wiring
；
9
、
the appliance should be supplied through a residual current device (RCD)having a rated
residual operating current not exceeding 30 mA.
1
0 、
If the mains cord of this appliance is damaged,It must only bereplaced by our service
representative,As special tools and/or parts are required
Solutions of Fault
Phenomenon Reason How to Solve the problem
11