IS275-17L
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Section G - Page 1/3
Section G
Motor & Pump Shelf Assembly & Installation
Section G
If your structure has studs 24” on center, proceed to Step 4.
Mounting Shelf Assembly to Structure that has Studs 16” On Center
Prepare the (8) locations indicated below for the installation hardware (not included) and secure the mounting shelf to your chosen location as shown below.
NOTE:
Mounting location and installation hardware (not included) must be able to withstand the weight of 145 lbs, the assembled shelf with motor and
pump assembly.
1
Assemble Shelf Support Brackets
Using a 9/16” wrench and 9/16” socket and socket wrench assemble (2) shelf braces so the mounting tabs are behind the shelf lip and secure with (2) 3/8”-16 x
1” Hex Bolts and (2) 3/8”-16 Nylock Nuts as shown below.
2
