9
7. WHO function
8. Auto power-off
9.Volume adjustment
4. Using your Monitor for the First Time
4.1. System Settings
After you load the battery for the monitor,long press the START/STOP button for more than
3s, and then you can start to set.
A. Setting the Users
Press the MEM button and then you can set the A/B user by shifting the A/B user button.
B. Setting the Year/Month&Date/Time/Volume
Setting the Year:
Initial year is 2019, when the year display is flashing, press the memory button, the year will
increase by I year each, hold the memory button and it will increase continuously 1 by 1, until
2049, and then rollover to 2019, once the year Setting is OK, press SET button to confirm.
Setting Month/Date:
Initial Month/Date is 1/01, when the Month display is flashing, press the memory button, the
month will increase by 1, press SET button to confirm, and do in the same way to set the date.
Press SET button to confirm.
Setting Time :
When the hour display is flashing, press the memory button, the hour will increase by 1, press
START/STOP button to confirm, and do in the same way to set the minute. Press
START/STOP button to confirm.
Setting Volume:
When display with SP is flashing, press memory button to switch volume 1, volume 2, volume
3 or OFF. Press START/STOP button to confirm.
C. Record Delete
When you checking the memory data, long press memory to delete existing user
measurement data.
Note:
You can’t delete all measurement record from the monitor storage at one time, if you
decide to delete the all record, please keep the record in another way, in case you need it
some days later. Take the battery out won’t lead to a record missing.
5. Measurement Procedure
Note:
You should always be seated and calm before and during measurement.
5.1. Before measurement:
• Avoid eating and smoking as well as all forms of exertion directly before measurement. These
