6. GASKET MATERIALS MAINTENANCE RECOMMENDATIONS
Page 52
1998-2006 Edition
In order to maintain the high combustion efficiency, reduce annual fuel cost, extend the operational life and
ensure safe operation of the pellet stove, Jamestown highly recommends that all gasket materials be
inspected at least annually and adjusted or replaced as necessary. The table below shows the frequency of
inspection and replacement of the various gasket materials.
A replacement gasket kit (part # 03HAA) is available at any Jamestown Dealer. Instructions for replacing all
the gaskets are included with the gasket kit.
Gasket Type
Pellet Stove
Model
Inspection
Frequency
Replacement
Frequency
Comments
Door Gasket
All
Monthly
As needed or
every 2 tons
(1818kg)
Inspect door gasket seal every time door is opened
and closed for proper seal. If seal is poor and door
gasket cannot be adjusted to create the required
seal, replace.
Ashpan Gasket
All
Monthly
As needed or
every 2 tons
(1818kg)
Inspect ashpan gasket seal every time door is
opened and closed for proper seal. If ashpan gasket
cannot be adjusted to create the required seal,
replace.
Glass Gasket
All
Every Ton
Annual
Replace annually.
Exhaust Blower
Gasket
All
Annual
During Exhaust
Blower
Replacement
Replace this gasket every time the exhaust blower is
removed for cleaning or replacing blower motor.
Summary of Contents for J1000B
