6
Operating instructions
How do I use the Ultra 6050 cleaner?
To avoid causing permanent damage: Never operate the unit without
water in the cleaning tank. Never use boiling water.
1
Open the lid and fill the stainless steel tank with warm water
(ideally 45 to 50
O
C). Do not exceed the “MAX” marking on
the inside of the tank.
To avoid the possibility of scratches from friction during
operation, do not overlap items. Ensure items are
spaced apart.
Place the item(s) to be cleaned into the water. If cleaning
small items, then place the basket in the tank first. Ensure
the item is immersed as fully as possible, ensuring the water
level does not exceed the “MAX” marking.
Close the lid and ensure your hands are dry. Plug the
supplied mains cable into the unit and then into the nearest
mains outlet.
When the unit is plugged in, the display will show the
180
second (3 minute) setting. If a different time is required,
press the SET button to cycle the time through the five
settings 180s - 280s - 380s - 480s - 90s. Move to the next
step when the display shows your required time.
MAX
2
MAX
3
4
5
Press the ON button to start cleaning. The red operation
indicator will illuminate while the unit is in operation. The
built in timer will count down the time automatically.
Note: During operation the unit will “buzz”, this is normal.
