TRAX Apollyon User’s Manual
2-20
To retrieve data using a flash drive, plug it into the USB Memory Port of
the Apollyon, then highlight the
USB
selection on the Main Menu of the
Apollyon and press the DO key.
You will then see the USB Down-
load screen, which gives you the
option to download the data in
memory to the flash drive. To do
this, with the
Download
option
flashing, press the DO key to start
the data download.
While the data is being retrieved, the display on the Apollyon will show:
When all of the data in the Apollyon has been downloaded, you will see
the message 'Transfer Complete!' on the Apollyon. It will then return to the
screen it was on before the download began.
Note: We recommend that you
do not
clear the memory of the Apollyon
until you have successfully brought the USB flash drive back to the office
and processed the data in STARnext. Should something happen to the
flash drive, such as getting lost or damaged, you can always go back to the
Apollyon for the data.
To retrieve the data from the flash drive to your computer using STARnext,
plug the flash drive into your computer then go to the
File
menu in STARnext
and select
Acquire
>
USB Flash Drive
.
DOWNLOAD EXIT
v3.68
Write ALL counts to
the USB Flash Drive
USB Download Screen
TRANSFER IN PROGRESS
COUNT:01
BLOCK:000001
Sending Data...
Download in Progress
Summary of Contents for TRAX Apollyon
