JAMAR Technologies TRAX Apollyon, User Manual

Page: 39 / 88

2-17
This screen shows the road
tube diagnostics (refer to
page 2-10), which allows
you to check the strength
of the pulses coming from
the tubes while the study is
being conducted. By using
this screen, you can check to see if any road tubes are starting to
fail while you are still collecting data.
Ending a Count
There are several ways to end a count. The most common way is to manually
turn the TRAX Apollyon off. To turn the Apollyon off, press the POWER
key and hold it down for 5-6 seconds. The Apollyon will turn off and the
count will be stored in its internal memory. Additional studies can then be
conducted with the unit. The TRAX Apollyon can hold up to 150 different
studies in its memory.
You can also end the count through
the options accessed by hitting the
DO key while a study is in prog-
ress.
The
New
option will end the cur-
rent count and immediately begin a
new one with the same default settings. This option is useful if you want to
download data you have collected, but still want to leave the Apollyon in
place. The
Stop option will end the current count without restarting it. The
Back
option will return you to the Status screens.
Chapter 2 — Operational Features of the TRAX Apollyon
A:
B:
C:
D:
Volume Only Status Screen #6
BACK NEW STOP
Stop Count Screen