JAMAR Technologies TRAX Apollyon, User Manual

Page: 24 / 88

TRAX Apollyon User’s Manual
2-2
How is the TRAX Apollyon powered?
The TRAX Apollyon is powered by long-life lithium batteries. No battery
charging is required.
Using the Keypad
The TRAX Apollyon contains a membrane keypad comprised of 12 keys:
numbers 0 through 9, DO and TAB (also POWER). This keypad is used to
make all entries and menu selections for the TRAX.
Important Note:
The keys of the membrane keypad do not need to be
pressed very hard to activate. A light touch is best and will prolong the
life of the keypad.
The POWER button (also used as the TAB button) is used to turn
the unit on. Simply press the press the button and the unit will
turn itself on. To turn the Apollyon off, press and hold down the
button for five seconds.
Note that the Apollyon also has a Main Power tog-
gle switch, which is located at the top middle of the
Apollyon. As the name suggests, this switch controls
the main battery connection to the Apollyon. This
toggle should always be left set to ON, except in cases where the unit is
no longer responding to the POWER key (described above) and needs a
hard reset.
Two buttons are all that are used to move from menu to menu, and to select
from the various options shown on the display. One key (TAB) is used to
move the highlight to the option you want, and another is used to imple-
ment it (the DO key). In general, you press the TAB key until the option
you want is flashing, and then press the DO key. If you move the highlight
too far and overshoot the desired option, just keep pressing the TAB key
until it is re-selected.