background image

Technical Manual
702138-0008

Series C628
Batch Counter

(C628-9XXX)

Introduction

Your Veeder-Root brand C628 Batch Counter is one model in a family of 1/8 DIN units
which offers breakthrough display technology as well as easy-to-program single-line
parameters.  Designed to provide instant visual feedback regarding an application’s key
input value, the C628 not only has a 0.71” high LED display (27% larger than other 1/8
DIN units), but also the ability to change display color based on process status
(programmable parameter in Operation Mode).  Easy programming is made possible via a
help function and a secondary legend display.

This manual will guide you through the installation and wiring of your C628 unit with
information on proper panel mounting and rear terminal layout and wiring instructions.
In addition, the instrument’s operation and programming modes are thoroughly
explained.  The Operation Mode provides day to day operation and allows editing of
preset values.  The Program Mode enables the configuration of various parameters prior
to initial operation.  These parameters include those for basic configuration as well as
other settable features which will enhance the functionality and usability of the device.

This manual also provides
information on the C628
Batch Counter’s presets,
transistor and relay outputs,
product specifications, and
ordering and warranty
procedures.

Index

Installation

Panel Mounting

page 2

Wiring

page 3

Operation

Front Panel

page 4

Operation Mode

page 5

Programming

Program Mode

page 6-10

Appendix A

Specifications

page 11

General

Ordering Information

page 12

Warranty

page 12

Features

• AWESOME 0.71” high digit LED display

• Programmable color change display based on

an event

• Independent display of background total

• Programmable help function and secondary

legend display

• Choice of NPN or PNP primary input

• Filter speed settable for 20, 200, or 10,000 Hz

• Standard outputs:  two NPN transistors & one

relay (optional 2nd relay)

• Front panel reset enable and preset lockout

• Optional RS-485 plug in card

• CE approved

Veeder-Root 

brand 

Summary of Contents for C628 Seriec













Reviews: