JAI SP-5000C-CXP4 User Manual Download Page 9 | Manualshive

Page: 9 / 73

background image

SP-5000M-CXP4 / SP-5000C-CXP4

- 7 -

1.

General

The  SP-5000M-CXP4  and  SP-5000C-CXP4  are  members  of  JAI’s  Spark  Series.  They  are  high
performance cameras with high resolution and a fast frame rate suitable for high speed machine
vision applications. The SP-5000M-CXP4 is a monochrome progressive scan CMOS camera and the SP-
5000C-CXP4 is the equivalent Bayer mosaic progressive scan CMOS camera. Both are equipped with
a CMOS sensor offering a 1-inch optical format, a resolution of 5.24 million pixels, and a 5:4 aspect
ratio.    They provide a maximum of 253.8 frames per second for continuous scanning with 2560 x
2048 full pixel resolution for both monochrome and raw Bayer output.

8-bit, 10-bit or 12-bit output can be selected for both monochrome and raw Bayer formats. The SP-
5000C-CXP4 is also capable  of performing in-camera color interpolation at reduced frame  rates.
The  new  cameras  feature  a  CoaXPress  interface  which  uses  coax  cable  with  the  capability  of
supplying power through the cable. The SP-5000M-CXP4 and SP-5000C-CXP4 use a quad coaxial cable
interface. A full pixel readout, partial scan readout, or binning mode (monochrome only) can be
selected depending on the application.

The  SP-5000M-CXP4  and  SP-5000C-CXP4  have  various  comprehensive  functions  needed  for
automated optical inspection applications, such as solid state device inspection or material surface

inspection.  They  incorporate  video  processing  functions  such  as  a  look-up  table,  shading
compensation  and  blemish  compensation  in  addition  to  fundamental  functions  such  as  trigger,
exposure setting, and video level control.

As a common Spark Series feature, a new connector for lens control is employed. SP-5000M-CXP4
and  SP-5000C-CXP4  support  P-iris  and  motor-driven  lenses  as  standard  lens  control  capabilities.
Factory  options  are  available  to  configure  this  connector  to  support  DC  iris  systems,  as  well  as
provide a video iris output signal, or to provide additional TTL IN and OUT lines.

The latest version of this manual can be downloaded from: www.jai.com
The latest version of the Camera Control Tool for the SP-5000M-CXP4 and SP-5000C-CXP4 can be
downloaded from: www.jai.com
For camera revision history, please contact your local JAI distributor.

2. Camera composition

The standard camera composition is as follows.

Camera body

1

Sensor protection cap 1
Dear Customer (sheet) 1

The following optional accessories are available.

Tripod base

MP-42

Power supply unit

PD-12 series

«
...
7
8
9
10
11
...
»

Summary of Contents for SP-5000C-CXP4










































































Reviews:

No comments

Related manuals for SP-5000C-CXP4

Brand: D-Link Pages: 16

Brand: NA-DE Pages: 2

Brand: NA-DE Pages: 5

Brand: NA-DE Pages: 5

Brand: NA-DE Pages: 2

Brand: Hafele Pages: 57

Brand: Qvis Pages: 44

Brand: RAB Lighting Pages: 9

Brand: Doberman Pages: 6

Brand: Tracker Pages: 18

Brand: i-PRO Pages: 28

Brand: Abus Pages: 18

Virtuoso Series

Brand: Vitek Pages: 20

Orbiter Gold Microspheres

Brand: VCL Pages: 40

STI-6400 Exit Stopper

Brand: Safety Technology International Pages: 7

Brand: SVBONY Pages: 41

Brand: urmet domus Pages: 8

Brand: Ganz Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands