Event Control Function
The Event Control function is a function that outputs a signal change point inside the camera
as information indicative of an event occurrence (event message).
■ Events that Can Use the Event Control Function
Events that can use the Event Control function are as follows. You can specify whether or not
to send an event message when an event occurs at each event.
AcquisitionStart,
AcquisitionEnd,
ExposureStart,
ExposureEnd,
Error
■ Flow from Detecting an Event to Sending an Event Message
Event
Control
Cautions
This function can only be used with CXP 2.0 or later. The CoaXPress frame grabber
board used must support CXP 2.0 and the Event Control function.
You can check the current CXP version in CxpVersionUsed of
Transport Layer Control. If CxpVersionUsed is CXP1.1, you cannot use this function.
- 50 -
