![background image](http://html1.mh-extra.com/html/jai/sp-45000c-cxp4a/sp-45000c-cxp4a_user-manual_631425066.webp)
Setting range
Default value
Description
Configure shading correction settings.
0: FlatShading,
1: ColorShading
FlatShading
Select the shading correction method.
0: Off, 1: User1,
2: User2, 3: User3
Off
Set the area to which to save shading correction data.
When this is set to [Off], shading correction data is not saved.
ー
ー
Execute shading correction.
This command cannot be excuted under the following conditions.
・When no image is output.
・Outputting TestPattern.
・When the ROI setting is under the following conditions.
(Width or Height are less than 128)
・Shading Mode is Off.
ー
ー
Display the shading correction results.
0: Idle
1: Succeeded (Shading calibration was Succeeded.)
2: Error1 (Image was too bright.)
3: Error2 (Image was too dark.)
4: Error3 (Could not calibrated.)
5: Error4 (Correction Limit.)
Configure settings for JAI white blemish correction.
True, False
True
Enable/disable blemish correction.
ー
ー
Execute blemish detection.
This command can not be executed under the following conditions.
・When no image is output
・Outputting TestPattern
・In Sequencer mode
・In MultiRoi mode
・In single ROI mode
1 ~ 99
10
Set the blemish detection threshold.
ー
ー
Stores the Blemish data that to be entered by
1 ~ 1000
1
Select the index for the target blemish coordinates
(BlemishDataPosition X/Y).
BlemishCompensationPositionX
-1 ~ 8191
ー
Display the X coordinate (horizontal pixel position) of the target blemish
selected in [BlemishCompensationIndex]. You can also manually enter the X
coordinate of the blemish you want to correct.
BlemishCompensationPositionY
-1 ~ 5439
ー
Display the Y coordinate (vertical pixel position) of the target blemish
selected in [BlemishCompensationIndex]. You can also manually enter the Y
coordinate of the blemish you want to correct.
BlemishCompensationDataClear
ー
ー
Delete detected or specified blemish information selected in
0 ~ 3183
0
Display the number of target blemishes.
Item
BlemishCompensationNumber
Shading
ShadingCorrectionMode
ShadingMode
ShadingDetectResult
PerformShadingCalibration
BlemishControl
BlemishEnable
BlemishDetect
BlemishCompensationIndex
BlemishDetectThreshold
BlemishStore
SP-45000M-CXP4A/SP-45000C-CXP4A
- 66 -