![background image](http://html1.mh-extra.com/html/jai/sp-45000c-cxp4a/sp-45000c-cxp4a_user-manual_631425018.webp)
Step 5: Saving the Settings
The setting values configured in the tool will be deleted when the camera is turned off. By saving
current setting values to user memory, you can load and recall them whenever necessary. You
can save up to three sets of user settings in the camera. (User Set1 to 3)
Tool
一時メモリ
■ To save user settings
1
Stop image acquisition.
2
Expand [UserSetControl], and select the save destination ([UserSet1] to
[UserSet3]) in [UserSetSelector].
The factory default setting values are stored in [Default] and cannot be overwritten.
UserSet1
UserSet2
UserSet3
DefaultSet
Working Set
Memory(Flash)
Memory(RAM)
3
Select [UserSetSave], and click [Execute
‘
UserSetSave
’
Command].
The current setting values are saved as user settings.
User Set
Control
■ To load user settings
1
Stop image acquisition.
User settings can only be loaded when image capture on the camera is stopped.
2
Select the settings to load (UserSet1 to UserSet3) in [UserSetSelector].
3
Select [UserSetLoad], and click [Execute
‘
UserSetLoad
’
Command].
The selected user settings are loaded.
Note
Settings can only be saved when image acquisition on the camera is stopped.
Caution
SP-45000M-CXP4A/SP-45000C-CXP4A
- 18 -