JAI RM-9730CL User Manual Download | Manualshive

Page: 3 / 54

background image

Disclaimer iii

TM/TMC/RM/RMC-9730CL

Disclaimer

The material contained in this manual consists of information that is proprietary to JAI Inc., and
may only be used by the purchasers of the product. JAI, Inc. makes no warranty for the use of its

product and assumes no responsibility for any errors which may appear or for damages resulting
from the use of the information contained herein. JAI, Inc. reserves the right to make changes

without notice.

Microsoft, Windows 95, 98, NT, 2000, XP, and Windows Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

Warranty

Please contact your factory representative for details about the warranty.

Certifications

CE Compliance

The TM-9730CL series of cameras has been certified to conform to the requirements of Council

Directive 89/336/EC for electromagnetic compatibility and to comply with the following European
Standards:

EMC EN55022: 1998 + A1: 2000 CLASS A
EN55024: 1998 + A1: 2001

All JAI Inc. products bearing the CE mark have been declared to be in conformance with the applica-
ble EEC Council Directives. However, certain factory-installed options or customer-requested

modifications may compromise electromagnetic compatibility and affect CE compliance. Please
note that the use of interconnect cables that are not properly grounded and shielded may affect CE

compliance.

Contact the JAI Inc. Applications Engineering Department for further information regarding CE com-
pliance.

FCC

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference, in which case the
user will be required to correct the interference at his own expense.

«
1
2
3
4
5
...
»

Summary of Contents for RM-9730CL























































Reviews:

No comments

Related manuals for RM-9730CL

Brand: 3M Pages: 8

Brand: IDS Pages: 36

Brand: Wansview Pages: 12

Brand: Waters Pages: 2

Brand: TELETECH Pages: 4

Brand: DAITEM Pages: 22

Brand: nedis Pages: 68

Brand: Fike Pages: 4

Brand: GCE Pages: 28

Brand: Pentax Pages: 124

Brand: ZKTeco Pages: 55

Brand: Hitron Pages: 21

Brand: chinavasion Pages: 2

Brand: Dante Pages: 40

Brand: ABLE Pages: 55

IOLAN SDG1 LA/LE

Brand: Perle Pages: 21

Brand: Axis Pages: 30

Brand: Gator Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands