JAI RM-9730CL User Manual Download | Manualshive

Page: 31 / 54

background image

Software Introduction

23

TM/TMC/RM/RMC-9730CL

2.Camera-Control Software

6

Introduction

The AccuPiXEL series cameras are high resolution, progressive scan cameras with JAI-proprietary

LUT control and other excellent features. The camera control software was developed to function as
standard software for the entire AccuPiXEL series. This software can open either the RS-232 serial

port (COM) or Camera Link. Camera Link users must physically install the Camera Link frame grabber
board into the PC. Also install the Camera Link API (clserXXX.dll) software. These cameras are

specially designed to capture images in progressive scan (non-interlace) format, producing a full
frame of electronic shutter images, as well as normal images. This document addresses the

AccuPiXEL version 5.0.0 software, last modified in 2007 and available for download at www.jai.com.

6.1

Software Installation

Following are instructions to install the AccuPiXEL series camera-control software on a PC.

6.1.1

Before Installing the AccuPiXEL Series Camera-Control Software

Before installing the AccuPiXEL series Camera-Control Software, please note the following.

•

The AccuPiXEL camera-control software is tested for Microsoft Windows 2000 and XP operating
systems.

•

We recommend that you use small fonts for the Display Properties dialog box in the control
panel.

•

The AccuPiXEL series camera-control software requires one free communication port that is not
in conflict with other peripherals such as the mouse or modem.

•

Installation of the AccuPiXEL series camera-control software requires 2.0 MB of free space on
your PC hard disk.

•

Uninstall any previous versions of AccuPiXEL on the hard drive. See Section 6.1.4 on page 27.

6.1.2

Installing the Software

To install the AccuPiXEL series camera-control software, follow the steps below.

1.

Download the AccuPiXEL software from the JAI web site at www.jai.com.
Locate the software by going to the camera description, clicking on the Software link, or
searching AccuPiXEL using the site search feature.

2.

Click on the “Save” button to save a compressed copy of the software to the hard drive of your
system. Do not confuse AccuPiXEL with dual-tap AccuPiXEL software.

«
...
29
30
31
32
33
...
»

Summary of Contents for RM-9730CL























































Reviews:

No comments

Related manuals for RM-9730CL

Brand: 3xLogic Pages: 25

VX-2A-B-IWD (R)

Brand: 3xLogic Pages: 80

Brand: SAFERA Pages: 15

Brand: Abus Pages: 18

Brand: Digitus Pages: 9

Brand: MSA Pages: 104

Brand: TRASSIR Pages: 2

Brand: safer guard Pages: 7

Brand: FLIR Pages: 2

Brand: Revo Pages: 7

Big Lock Easy Home Basic BAC-20

Brand: Camos Pages: 22

NIVD-DIVA-SW13AI

Brand: Okina USA Pages: 3

CMD-4000 Series

Brand: Dakota Digital Pages: 6

Brand: Kompernass Pages: 213

Brand: jablotron Pages: 2

Brand: COHU Pages: 21

Brand: TBK vision Pages: 7

Brand: Apeman Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands