LT-400CL
43
Applicable modes:
TR=1 Shutter-select mode only
Associated functions:
Commands PER, PEG, PEB – Programmable Exposure
Refer to
6.3.2 Electronic shutter (Exposure)(Command PER,PEG,PEB)
for further
details.
8.14 Command GA – Gain level master / G channel
Adjust the master gain or G channel gain in accordance with gain mode (GM).
GM=0 Master tracking
Adjust as master gain
Adjusting range is 0 to 800
GM=1 Individual gain
Adjust for G channel
Adjusting range is -400 to 1400
8.15 Commands GAR and GAB – Red and blue gain levels
In conjunction with the Command SGR, SGG and SGB, Gain Low or Gain High this
function allows the individual setting of gain for all channels. It is important to note
that increasing the gain will lead to an increased noise level and reduced S/N-Ratio.
Settings:
-400 to 600 (where 100 equals 1dB) (GM=0)
-400 to 1400 (where 100 equals 1dB) (GM=1)
Associated function:
Commands SGR, SGG, SGB, GM
Applicable modes:
All modes
Refer to chapter
6.3.5 Gain control
for further details.
8.16 Command GM – Gain mode
This command sets the master tracking mode or the individual mode.
GM=0 Master tracking
GM=1 Individual mode
8.17 Command KN – Knee ON/Off
This command activated Knee correction function.
Settings:
0=OFF, 1=ON
8.18 Commands KSR, KSG and KSB – Knee slope for R, G and B
See command KN for description of this function
Settings:
0 to 65535
Associated functions
Command KN, Commands KPR, KPG and KPG
8.19 Commands KPR, KPG and KPG – Knee point for R, G and B
See command KN for description of this function
Settings:
0 to 1023
Associated functions:
Command KN, Commands KSR, KSG and KSB
Refer to chapter
6.3.7 Knee correction
for further details.
