JAI GOX-5105M-CXP, User Manual

Page: 92 / 166

User Manual (Ver.1.4) - Main Functions
GOX-5105MC-CXP | GOX-8105MC-CXP | GOX-12405MC-CXP | GOX-16205MC-CXP | GOX-20405MC-CXP | GOX-24505MC-CXP
- 92 -
Cautions :
l
For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is
limited to 8 times the amount of gain before correction. (The amount of gain cannot be
increased to more than 8 times the amount of gain from before correction.)
l
If the area in the screen with the highest brightness level is 175 LSB or less (during 10-bit
video output), proper correction is not possible.
To Use the Shading Correction Function
Configure the settings as follows.
Item Setting Value Description
ShadingCorrectionMode
FlatShading,
ColorShading
Select the shading correction mode.
ShadingMode
User1, User2, User3,
Off Select the user area to which to save the shading
correction value.
Display a white chart under a uniform light, and execute PerformShadingCalibration .
Notes:
l
After shading correction is executed, the shading correction value is automatically saved to
the user area selected in ShadingMode.
l
The PerformShadingCalibration command cannot be executed under the following
conditions. (An error also occurs when ShadingMode is set to Off).
- When outputting no image.
- When outputting TestPattern.
- Width and/or Height are less than 512 ( ROI Function (Single ROI) )
- In FD2x2Binning mode ( Binning Function )
- In ImageScaling mode ( Image Scaling Mode (Xscale) )
- In Decimation mode ( Decimation Mode )
- In Sequencer mode ( Sequencer Function )
- In MultiRoi mode ( ROI Function (Multi ROI) )
- In Reverse mode ( Image Flip Function )
- In GradationCompression mode ( Gradation Compression Mode )
- In ALC mode ( ALC (Automatic Level Control) Function )