User Manual (Ver.1.4) - Parts Identification
GOX-5105MC-CXP | GOX-8105MC-CXP | GOX-12405MC-CXP | GOX-16205MC-CXP | GOX-20405MC-CXP | GOX-24505MC-CXP
- 18 -
④
DC IN/TRIG Connector (6-Pin Round)
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
Camera Side: HR10A-7R-6PB (Hirose Electric or equivalent )
Cable Side: : HR10A-7P-6S (Plug) (Hirose Electric or equivalent )
Pin No.
Input/Output
Signal
Description
1
Power In
DC In
DC in +10V
～
+25V
2
In
Opto In+
3
In
Opto In-
4
Out
Opto Out+
5
Out
Opto Out-
6
GND
GND
Caution:
If you supply the power via the DC IN cable before the PoCXP power supply, the camera
may restart. In this case, after the restart, the camera will operate normally with the PoCXP power
supply.
Note:
See
Recommended Circuit Diagram (Reference Examples)
for the recommended
Input/Output circuit diagrams.
⑤
POWER/TRIG LED
Indicates the power or trigger input status.
LED
Status
Lit amber
Camera initializing.
Lit green
Camera in operation
Blinking
green
During operation in trigger mode, trigger signals are being input.
Note:
The blinking interval is not related to the actual input interval of the external
trigger.
