Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
24
Step 7: Saving the Settings
The setting values configured in the player (eBUS SDK for JAI) will be deleted when the camera is
turned off. By saving current setting values to user memory, you can load and recall them
whenever necessary. You can save up to three sets of user settings in the camera. (User Set1 to 3)
Note
: Changes to settings are not saved to the computer (eBUS SDK for JAI).
To save user settings
1
Stop image acquisition.
2
Expand UserSetControl, and select the save destination (UserSet1 to
UserSet3) in UserSetSelector.
Note
: The factory default setting values are stored in Default and cannot be overwritten.
Caution
Settings can only be saved when image acquisition on the camera is stopped.
3
Select UserSetSave, and click Execute ‘UserSetSave’ Command.
The current setting values are saved as user settings.
To load user settings
1
Stop image acquisition.
User settings can only be loaded when image capture on the camera is stopped.
2
Select the settings to load (UserSet1 to UserSet3) in UserSetSelector.
3
Select UserSetLoad, and click Execute ‘UserSetLoad’ Command.
The selected user settings are loaded.
eBUS SDK for
JAI (Player)
一時メモリ
UserSet1
UserSet2
UserSet3
Working Set
Memory(Flash)
Memory(RAM)
eBUS Player for JAI
Summary of Contents for GOX-12409C-PGE
Page 72: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 72 Spectral Response GOX 6409MC PGE ...
Page 73: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 73 Spectral Response GOX 12409MC PGE ...
Page 74: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 74 Spectral Response GOX 20409MC PGE ...
Page 75: ...Go X Series Rolling Shutter GigE Vision I F Preliminary 75 Dimensions ...
