— 12 —
GO-5101M-PMCL / GO-5101C-PMCL
v
Clear the [JAI Vision Filter Driver] checkbox, and save.
3
Verify the settings for using Camera Link.
The GO-5101-PMCL supports GenICam and Gen-CP. Check the following settings when
controlling the camera via JAI SDK.
Checking the frame grabber board's settings
Settings must be configured on the frame grabber board to enable Gen-CP support.
For details, refer to the operating instructions for each board.
Checking JAI SDK's settings
u
Start JAI Control Tool, and click the
(Settings) icon at the top right.
v
Check that the [JAI_GenCP_Camera_Link] and [Camera Link Transport Layer] settings are
configured as follows.
