— 16 —
GO-5100M-USB / GO-5100C-USB
Example: When changing [Pixel Format]
Note
Direct entry of numerical and text values is possible for some setting items.
Configuring Exposure and External Trigger Settings
Configure settings related to exposure control methods and trigger control.
The factory settings are as follows. Change settings as necessary, according to the intended purpose
or application.
Factory default values
Item
Default value
Trigger Selector (trigger operation)
Frame Start
Trigger Mode
Off
Trigger Source (trigger signal source)
Line 5 - Optical In 1
Trigger Activation (trigger polarity)
Rising Edge (rising edge of input signal)
Exposure Mode
Timed (control via exposure time)
Exposure Time
13427 (µs)
Exposure Auto*
Off
* This item is only enabled when [Exposure Mode] is set to [Timed].
Caution
When [Exposure Mode] is set to [Off], [Trigger Mode] cannot be set to [On]. Other settings may also be restricted
depending on the exposure mode, so be sure to set the exposure mode before configuring the trigger settings.
Configure the settings by expanding [Acquisition Control] and configuring the following items.
Caution
Settings can only be configured when image acquisition on the camera is stopped. If an item is grayed
out and the setting cannot be changed, stop image acquisition beforehand.
