JAI GO-5000M-PMCL-UV, User Manual

Page: 37 / 74

— 37 —
GO-5000M-PMCL-UV
Exposure setting
This section describes how to set the exposure settings.
Exposure Mode
The exposure mode set the way of the exposure. There are three ways.
If Exposure Mode is set at Timed, the exposure operation can be selected as follows by setting
Trigger Option.
Frame Start Trigger: The start of image capturing of a frame is controlled by the external trigger.
Trigger Mode ON: Start the exposure by the selected signal for the frame start
Trigger OFF: The camera is in free-running mode
If the trigger is used, it uses “Frame Start”.
The procedure is;
1. Select “Frame Start” in “Trigger Selector”
Note: In the GO-5000M-PMCL-UV, only “Frame Start” is available.
2. Select “Timed” or “Trigger Width” in “Exposure Mode”.
3. Set “ON” in “Trigger Mode”.
Important note:
For trigger operation, Exposure Mode must first be set to something other than OFF and then
Trigger Mode of Frame Start must be ON.
If the exposure mode is set to OFF, the trigger mode cannot be set.
Operational mode by the combination of the exposure mode and the trigger control.