JAI GO-5000M-PMCL-UV, User Manual

Page: 19 / 74

— 19 —
Digital IN/OUT interface
In the GO-5000M-PMCL-UV, the software control tool can assign the necessary signals used in
the system to digital inputs and outputs.
Line Selector
In the Line Selector, the following input and output signals can be assigned.
Line Source
Line source signal can be selected from the following table to connect it to the line item
which is selected in the line selector.
Line Mode
Indicates the status of the item selected in Line Selector. (INPUT or OUTPUT)
Line Inverter
Inverts the signal polarity for the item selected in Line Selector. (False=Positive, True=Negative)
Line Status
Indicates the status of the selected signal (input or output) (True=High, False=Low)
GO-5000M-PMCL-UV
Note)
As for LVAL, some line items cannot be connected. Refer to “GPIO matrix table”.
Line Format
Indicates the interface information of the input and output lines.
Not connected, TTL, LVDS or Opto-coupled
Note: In the GO-5000M-PMCL-UV, Opto-coupled interface is not available.