manualshive.com logo in svg

JAI CV-M 9CL, Operation Manual

Share
Download
JAI CV-M 9CL Operation Manual Download Page 29

CV-M9 CL

 

 
Printout of status and help list from the camera. 

The below lists shows printout from a hyperterminal.  
 

 
 
 

 
 

 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

Fpga Init. NG 
COMPLETE 
 
 
 
ST? 
SM=2 
SH=2 
PE=791 
PER=250 
PEG=250 
PEB=250 
TR=0 
SL=0 
LS=1 
RF=1 
TI=0 
TP=0 
SC=0 
BI=0 
BA=1 
CBAR=0 
WB=0 
GA=0 
GAR=0 
GAB=0 
BLG=0 
BLR=0 
BLB=0 
KN=1 
KSR=2048 
KSG=2048 
KSB=2048 
KPR=890 
KPG=890 
KPB=890 
WA=0 
SDM=1 
 
VN? 
VN=100 
PV? 
PV=37 
ID? 
ID=A100016683 
MD? 
MD= 
UD? 
UD= 

 

 

 

 
 
 
 
 
 
 
 

 
 
 

hp? 
*** CV-M9 Camera Control Help List ******************************* 
EB(echo back): 0=off, 1=on 
ST(status request): return the all settings 
VN(firmware version request): return the version no. of firmware 
UD(user ID request): return 16 letters of user ID 
SM(Shutter Mode): 0=preset shutter (RGB common set), 1=programmable exposure 
                (RGB common set), 2=programmable exposure(RGB individual set) 
SH(Shutter Speed): 0=off, 1=1/60, 2=1/100, 3=1/120, 4=1/250, 5=1/500 
                 6=1/1000, 7=1/2000, 8=1/4000, 9=1/10000, 10=1/16000, 11=1/50000 
PE(programmable exposure)(RGB common set): 0-791 
PE(programmable exposure)(RGB common set): 0-791 
PER(programmable exposure for Red): 0-791 
PEG(programmable exposure for Green): 0-791 
PEB(programmable exposure for Blue): 0-791 
TR(trigger mode): 0=normal, 1=edge pre-select, 2=pulse width control 
                  3=sensor gate control, 4=reset continuous 
SL(smearless mode): 0=off, 1=on 
LS(lval synchronous accumulation): 0=sync., 1=async. 
RF(rct fval type): 0=cameralink, 1=JAI standard 
TI(trigger input): 0=camera-link, 1=hirose 12pin 
TP(trigger polarity): 0=active low, 1=active high 
SC(scanning format): 0=full frame, 1=1/2 partial, 1=1/4 partial, 1=1/8 partial 
BI(binning): 0=binning off, 1=v binning 
BA(output bit allocation): 0=10bit, 1=8bit 
CBAR(color bar): 0=off, 1=on 
WB(white balance): 0=manual/one push, 1=continuous, 2=3200K, 3=4600K, 4=5600K 
GA(master gain level): -132-429 
GAR(red gain level): -231-231 
GAB(blue gain level): -231-231 
AW(one push white balance): 0=one push 
BLG(green black level): 0-1023 
BLR(red black level): 0-1023 
BLB(blue black level): 0-1023 
KN(knee on/off): 0=on, 1=off 
KSR(knee slope for red): 1-4095 
KSG(knee slope for green): 1-4095 
KSB(knee slope for black): 1-4095 
KSR(knee point for red): 0-1023 
KSG(knee point for green): 0-1023 
KSB(knee point for black): 0-1023 
SDM(shading mode): 0=on, 1=off 
LD(Load settings from Flash memory): 0=factory, 1=user1, 2=user2, 3=user3 
SA(Save settings in Flash memory): 1=user1, 2=user2, 3=user3 
WA(Set auto white sampling Area): 0=full, 1=upper left, 2=upper middle, 
                  3=upper right, 4=middle left, 5=middle, 6=middle right, 
                  7=lower left, 8=lower middle, 9=lower right, 
AWRS(Request one push W.Bal. result): 0=complete, 1=too bright, 2=too dark, 
                  3=timeout, 4=busy, 5=limit, 
*** Firmware Version 1.00 ***** Copyright(c) 2003-2004 JAI Corporation ***** 

 

 

Fig. 33. Terminal printout of status, ID and Help. 

 

- 28 -

 

   

Summary of Contents for CV-M 9CL









































Reviews:

No comments

Brands by name

Popular brands

Load more brands