![background image](http://html1.mh-extra.com/html/jai/cv-a50-ir/cv-a50-ir_operation-manual_3218626003.webp)
CV-A50 IR
1. General
The CV-A50 IR is a monochrome CCIR and EIA interlaced 1/2” CCD cameras with enhanced near
IR response, designed for a wide range of automated imaging application. The camera features a
compact housing and a wide range of unique functions.
The asynchronous trigger can be set to work in several modes, to allow functions such as pulse
width controlled shutter, programmable shutter speed and long time integration.
All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the
need for mechanical switches of jumpers.
The CV-A50 IR outputs an analogue video signal, with composite sync.
The latest version of this manual can be downloaded from:
The latest version of Camera Control Tool for CV-A50IR (CV-A50/60) can be downloaded from:
2. Standard Composition
The standard camera composition consists of the camera main body and C-mount protection cap.
3. Main Features
•
Compact size 1/2” monochrome near IR CCD camera
•
752 (h) x 582 (v) pixels for CCIR, 768 (h) x 494 (v) for EIA
•
Improved sensitivity, dynamic range and smear performance
•
High S/N ratio > 59dB
•
Extended range of functions and options compared to CV-M50 IR
•
Interlaced or non-interlaced scanning. Field or frame accumulation.
•
Internal, external HD/VD or random synchronization
•
Edge pre-select, pulse width and start/stop trigger modes
•
Long time exposure with external VD pulse
•
Frame delay readout mode
•
Exposure enable EEN, write enable WEN and pixel clock out
•
No mechanical switches or jumpers for mode setting
•
Short ASCII commands for modes setting via serial port
•
Shutter speed down to 1/10,000 in 8 steps
•
Windows NT/2000/XP setup software
- 2 -