CM-200 MCL / CB-200 MCL
5.
Pin Assignment
5.1.
12-pin multi-connector (DC-IN/Trigger)
Type: HR10A-10R-12PB-01(Hirose) male.
Use the part number HR10A-10P-12S for the cable side
Pin no.
Signal
Remarks
1
GND
2
+12 V DC input
3
GND
4
Iris video
Only for Continuous mode. TR=0
5
GND
6
NC
7
NC
8
GND
Fig. 2 Hirose 12-pin connector
9
XEEN out
10
Trigger in
TI=1. Or Camera Link (TI=0). *1)
11
DC+12V
12
GND
* Note: Factory default is trigger via Camera Link
5.2.
Digital Output Connector for Mini-CL (Camera Link)
Type: 26 pin SDR connector (3M or Honda type) Mini-CL connector
Important note:
This camera is also available in a Power over Camera Link (PoCL) version. In this case the 12-
pin Hirose multi connector is not present on the rear panel.
PoCL cameras require special frame grabbers that provide power to the camera via the Camera
Link cable. Please consult
(3
rd
party interfacing section) for information on
available PoCL frame grabbers.
Fig.3. Mini-CL
connector
Pin No
I/O
Name
Note
1,13,14,26
GND
DC
GND
7(+),20(-) I/O RXD
8(-),21(+) O TXD
Serial Com.
10(+),23(-) I Reserve
9(-),22(+)
I
Trigger
CC1 Ext. Trigger in
6(-),19(+) O TxOUT3
4(-),17(+) O TxOUT2
3(-),16(+) O TxOUT1
Camera Link out
2(-),15(+) O TxOUT0
5(-),18(+) O TxClk
Clock
for
CL
- 5 –
