![background image](http://html1.mh-extra.com/html/jai/cm-040mcl-ra/cm-040mcl-ra_user-manual_3225264009.webp)
CM-040MCL /-RA / CB-040MCL /-RA
6
4.
Locations and Functions
FC
C
se
al
Se
ri
al
No
.
Ca
ut
io
n
se
al
MINI-CL
POWER/ TRIG
①
②
③
④
⑤
⑥
1.
Lens mount
C-mount (Note *1)
2.
CCD sensor
1/2 inch CCD sensor
3.
26-pin multi connector
Camera Link interface(Miniature type)(Note*2)
4.
12-pin connector
DC +12V power and trigger input
5.
LED
Indication for power and trigger
6.
Mounting holes
M3 depth 3.5 mm for tripod mount plate(Note*3)
*1) Note:
Rear protrusion on C-mount lens must be less than 10.0 mm.
*2) Note:
When a Mini Camera Link cable is connected to the camera, please do not excessively
tighten screws by using a screwdriver. The Camera Link receptacle on the camera might
be damaged.
For security, the strength to tighten screws is less than 0.147 Newton meter (Nm).
Tightening by hand is sufficient in order to achieve this.
*3) Note:
The tripod adapter plate MP-41 and MP-40 can be used with CM-040MCL/CB-040MCL.
MP-40 uses only two screws instead of 4.
Fig.1. CM/CB-040MCL Locations