AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Main Functions
- 61 -
Command Sequencer Mode
As with TriggerSequencer mode, you can define up to 128 indexes beforehand in this mode. Set
SequencerCommandIndex to point to one of your pre-configured indexes. This index will be executed
on each trigger, until it is changed to point to a different index, typically by your vision application. In
this way, Command Sequencer mode allows you to programmatically adjust your sequence in
response to image analysis or input from other sensors.
The same index table will be executed for subsequent triggers unless the CommandSequencerIndex
value is changed.
Notes:
l
The same index table will be executed for subsequent triggers unless the CommandSequencerIndex
value is changed.
l
SequencerFrameNumber
and
SequencerSetNext
cannot be used in CommandSequencer mode.
Delayed Readout
Delayed readout allows images captured by a
Frame Start
trigger command to be stored temporarily
inside the camera (delayed readout buffer) and read out using a
AcquisitionTransferStart
trigger
after capture.
This function is useful when executing triggers simultaneously on multiple cameras.
Notes:
This function imposes a heavy processing load on the USB 3.0 bandwidth, as images from
multiple cameras are read out simultaneously. The delayed readout buffer is 16 frames in length
for 8-bit, 8 frames for 10-bit, and 8 frames for 12-bit.
For more information, see "
".
